|
|
Your Cart Subtotal: 0 items = ($0.00)
Cart Total: $0.00
|
Home > Photoelectric Effect Apparatus with Amplifier
|
|

|
Photoelectric Effect Apparatus with Amplifier
|
Product Information
Students can repeat the experiment that served to establish the quantum theory of radiation. A potential is applied to a photocathode while it is being irradiated by a source of monochromatic radiation, opposing the energy of the emitted photoelectrons. The voltage required to just stop the current flow is proportional to the energy of the photo-electron. Planck’s constant can be calculated using the slope obtained by plotting the stopping potential as a function of the reciprocal of the wavelength of the radiation. Because the amplifier is located only a few centimeters from the photodiode (within the case), the unit can achieve a minimum detectable photocurrent sensitivity of about 5 x 10-10 A. Spectral separation is provided by red, green and blue filters (included). A small incandescent lamp or fluorescent tube can be used, but monochromatic sources, e.g., a mercury arc or He-Ne laser, produce the best results. A full-scale meter is located on the front of the case along with two jacks, an on/off switch, and controls to zero the amplifier output and retard phototube voltage. Over all dimensions are 9 cm x 17 cm x 10 cm high. With three-wire cord and plug for operation on 120V, AC.
Tell a Friend about this item
|
|
Post Office Box 5003 • Tonawanda, New York 14151-5003
(phone) 800-828-7777 • (fax) 800-828-3299
Copyright© 2006, 2003, 2001 • Science Kit, LLC®.
Science Kit®, The SKope™, Boreal® and Teacher Developed-Classroom Tested™ are trademarks of Science Kit, LLC®
|
|
|